Installing The Memory Module - Kyocera FS FS-1300D Operation Manual

6-4

Installing the Memory Module

1
Turn off the printer and disconnect the power cord and printer cable.
2
Remove the right cover with a piece of metal similar to coin.
3
Remove the fixing tape in case of the first installation. Then, remove
the memory slot cover as shown in the figure.
4
Push out the clamps on both ends of the memory socket.
5
Remove the memory module from its package.
6
Aligning the cutouts of the memory module with the matching keys of
the socket, carefully plug the memory module into the memory
socket until it clicks in place.
Option