Replacing The Toner Container - Kyocera FS FS-1300D Operation Manual

Maintenance

Replacing the Toner Container

This section explains how to replace the toner container.
CAUTION
Do not attempt to incinerate the Toner
Container. Dangerous sparks may cause burns.
IMPORTANT
During toner container replacement, temporarily move
storage media and computer supplies (such as floppy disks) away
from the toner container. This is to avoid damaging media by the
magnetism of toner.
IMPORTANT
Kyocera Mita Corporation is not liable against any
damages or problems arising from the use of toner containers other than
those designated as original Kyocera toner containers. For optimum
performance, it is also recommended to use only the Kyocera toner
containers which are specifically intended for use in your country or
region. If the toner container for another destinations is installed, the
printer will stop printing.
Note
You do not have to turn printer power off before starting
the replacement. Any data that may be processing in the printer
will be deleted if you turn the printer power off .
1
Open the top cover.
2
Turn lock lever to the unlock position. Push lock lever to the position
marked arrow and pull out the toner container.
Note
Put the old toner container in the plastic bag (supplied
with the new toner kit) and discard it later according to the local
code or regulations for waste disposal.
4-3