Kyocera DP-3600 Instruction Handbook Manual page 236

H4: Parity
Parameter value
0
1
2
3
The factory setting is "None" (0 on the status printout).
H5: Protocol logic
Parameter value
0 Combination of 1 and 3 below
1 DTR/DSR, positive logic
2 DTR/DSR, negative logic
3 XON/XOFF
4 ETX/ACK
5 XON/XOFF recognized only as protocol
The factory setting is 0.
Note______________________________________________________________________
Since DTR/DSR protocol is not used with the RS-422A standard, select a parameter value other than
0, 1, or 2 for the H5 setting when using the RS-422A interface.
H6: Buffer nearly-full threshold
This is a percentage from 0 to 99. The factory setting is 90.
Meaning
None
Odd
Even
Ignore
Meaning
RS-232C/RS-422A Protocol
C-15