Form Feed; Mode Selection - Kyocera DP-3600 Instruction Handbook Manual

Form Feed

Mode Selection

Depending on the software, the message Waiting may be displayed in the message display when
you get to the end of a print job. This occurs when the software does not issue a final form feed to the
printer indicating the end of the print data. If you wait awhile, FormFeed TimeOut will be
displayed and the last page will be printed automatically. Pressing the FORM FEED key allows you to
finish printing immediately.
Check if the message display reads Waiting.
1.
Press the FORM FEED key. The message display will now read Processing and the last
2.
page will print.
Note______________________________________________________________________
The Waiting display may also appear due to interruptions in printed data while the computer is
processing data. Pressing the FORM FEED key unnecessarily when the message display reads
Waiting will result in a form feed.
The MODE key is used when making various mode settings and selections. For details, see the
section Mode Selection Menu beginning on the next page.
Operating Procedures
2-23