User's Instructions; Control Panel; Isolating Taps; Switching On - Chaffoteaux & Maury Britony SE 80 Nat Operating Instructions Manual

Combination boiler heating and instantaneous domestic hot water fanned flue system
Table of Contents

Advertisement

10

User's Instructions

Control panel

19. Two position Selector switch
O = Switched OFF
I = Switched ON
20.
= Domestic hot water temperature adjustment
21.
= Heating flow temperature adjustment
22. Heating temperature indicator lights
23.
Green indicator - Power ON
24.
Orange indicator - Burner ON
25.
Red indicator - Lock out / flame failure
26 "RESET" Reset button
2
27.
Pressure gauge
1
3
0
bar
28.
=- DHW mode indicator
29.
=- Heating mode indicator

Isolating Taps

(taps shown in Open position)
30. CH Flow isolating valve
31. Gas service tap
32. Water service tap
33. CH Return isolating valve

Switching on

1) Check that the gas service tap is opened at the
gasmeter and main power is on.
2) Check that pressure in central heating system is above
0.7 bar and below 1.5 bar with the pressure gauge
3) Open the gas tap 31.
4) The boiler is now ready to use.

Hot Water

1) Turn main switch 19 to position I . The green "power
on" indicator 23
will light.
Turn the DHW thermostat clock wise 21. The DHW
indicator will light 28.
2) Turn on a hot water tap, the orange "burner on"
indicator
will light 24 and the water will become hot.
29
27
30

Heating

1) Turn main switch 19 to on position I . The green "power
on" indicator
Turn the CH thermostat clockwise 20. The CH indicator
2
1
3
27.
0
bar
will light 29.
3) If the room thermostat (if fitted), the boiler temperature
control
and the clock (if fitted) are all calling for heat,
the orange "burner on" indicator
heating will be on.
When there is a need for hot water while the heating is on,
it is only necessary to turn on a hot tap. The heating will
be interrupted momentarily while the hot water is being
delivered. The boiler will switch back automatically to
heating when the tap is turned off.
Note: If the boiler has been turned off for some time the
first attempt to light it may result in a lockout
happens press the reset button 25 and the boiler will light.

To Turn Boiler Off Completely

1) Turn the selector switch 19 to the off position O.
2) Turn the gas tap 31 OFF.
22
26
25
reset
20
21
31
32
will light 23.
24
23
28
I
19
Fig. 22
33
Fig.23
will light and the
. If this
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents