Camera Default Settings - Intova EDGE X User Manual

USING EDGE X
Insert Micro SD memory card (class 10 required for HD video) before turning on. EDGE X cannot be
used if a properly inserted Micro SD card is not present.
To turn camera on, press and hold power ON/OFF button for 2 seconds and then release (if camera is in
sleep mode, short press once to waken)

Camera Default Settings:


Video Resolution 1080p@60fps

Photo Resolution 12 MP (megapixels)

Wi-Fi OFF
Video Mode LCD Monitor Display
Video mode icon
Digital Zoom
indicator bar
Quality icon
Micro SD card
inserted
To start video recording, press the shutter button while in video mode. To take a photo while recording
video (picture in video), press OK button (color of icon will change to orange).
Blinking Red Dot
(video recording in progress)
Video recording time
The EDGE X camera powers up with the following default settings:
Video mode idle screen
WiFi ON/OFF icon
Resolution
Microphone ON/Off icon
Recording video screen
Picture in Video icon
(Color will change to orange when OK button is pressed.)
White Balance
mode icon
7
Battery Level
Meter mode icon
Motion Detection
mode icon
Time stamp icon
Video recording
time remaining