Advertisement
Hitachi Global Storage Technologies
There are three power pins for each voltage. One pin from each voltage is used for
pre-charge in the backplane blind-mate situation.
This device uses only 5.0V. All V5 pins must be terminated.
Page 4
© 2010 Hitachi Global Storage Technologies
Produced in the United States 6/10
All rights reserved
Travelstar is a trademark of Hitachi Global Storage
Technologies. Hitachi and Hitachi Inspire the Next logo are
trademarks of Hitachi, Ltd in the U.S., Japan and/or other
countries.
Hitachi Global Storage Technologies' trademarks are
authorized for use in countries and jurisdictions in which
Hitachi has the right to use, market and advertise the brands.
The Travelstar trademark is authorized for use in the Americas,
EMEA and the following Asia-Pacific countries and
jurisdictions: Australia, Hong Kong, Japan, New Zealand,
South Korea and Taiwan. Contact Hitachi for further
information. Hitachi Global Storage Technologies shall not be
liable to third parties for unauthorized use of Hitachi Global
Storage Technologies trademarks.
References in this publication to Hitachi Global Storage
Technologies' products, programs, or services do not imply
that Hitachi intends to make these available in all countries in
which it operates. Some countries have laws that may affect
encryption-enabled devices. Hitachi GST assumes no
responsibility for compliance with laws that apply to our
products after they are sold or outside of our control.
Accordingly, we suggest that you review all laws of the
countries where you conduct business.
Product specifications provided are sample specifications and
do not constitute a warranty. Information is true as of the date
of publication and is subject to change. Actual specifications
for unique part numbers may vary. Please visit the Support
section of our website, www.hitachigst.com/support, for
additional information on product specifications. Photographs
may show design models.
1 June 2010
version 1.0
Advertisement
