Features At A Glance
Features may vary according to model
Cleaning your Refrigerator
Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Rinse with warm water and dry with a soft cloth.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator.
After you remove all of the package materials, clean the inside of your refrigerator before using it. See the "Care &
Cleaning" section in this manual.
See important information about cleaning glass shelves and covers in the "Optional Features" section of this manual.
Moving your Refrigerator
Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to cover the floor with
cardboard or hardboard to avoid floor damage. Always pull the refrigerator straight out when moving it. Do not
wiggle or "walk" the refrigerator when trying to move it as floor damage could occur.