Kyocera KM-C2030 Operation Manual page 69

1.10 Printing Control Numbers on Copies ("Distribution" Function)
6
Select either [First Page Only] or [All Pages].
❍ If [First Page Only] is selected, the control number is only printed on the first
page of each copy set.
❍
If [All Pages] is selected, the control number is only printed on all pages of
each copy set.
7
Select the desired color for the control number.
8
Touch [Enter].
❍ If the first control number is not set, the control numbers start from 001.
❍ After the control numbers reach 999, they return to 000.
9
Specify any other necessary settings.
10
Press the [Start] key.
Tip
To cancel the "Distribution" function, touch [Cancel] in the Distribution screen.
1
1-41