System upgrades
Low-profile boards
You will need to fit a corresponding slot adapter first before you can install a low-profile board in a
normal board slot.
Two-piece board slot covers are fitted to the slots intended for low-profile boards. The two pieces are
connected together with a screw.
►
Remove the desired board slot cover and undo the screw.
Do not dispose of the slot cover. If you remove the board again, you must reinstall the slot
!
cover (cooling, fire protection or EMC regulations to be complied with).
Mounting slot adapter
1
2
Removing slot adapter
2
1
44
►
Fit the slot adapter on the slot cover of the
low-profile board (1) and screw it on (2).
Now you can install the low-profile board in a
suitable slot like a normal board (see "Installing a
board").
►
Unscrew the screw (1) and remove the slot
adapter (2).
Fujitsu Technology Solutions