Setting Mode (08) - Sharp AR-651 Service Handbook

Code Name
200 Date and time setting
201 Destination selection
202 Setting for externally in-
stalled copy counter
203 Line adjustment mode
204 Auto clear timer setting
205 Energy saver timer set-
ting
206 Auto-power off timer set-
ting
210 Punch setting to the tab
paper
211 Inserter/
Reverse setting when
inserting the back cover
213 Reversal exit setting at
SADF - single-sided
copying
214 Tab paper printing/
tab extension setting
(2nd cassette feeding)
215 Tab paper printing/
tab shift setting (2nd
cassette feeding)
AR-651/810 ERROR CODES AND SELF-DIAGNOSIS 2 - 32

Setting mode (08)

Acceptable
Function Default
Value
ALL – 13 digits
ALL 0:EUR 0~2
1:UC
2:JPN
ALL 0 0~3
ALL 0 0~1
ALL 3 0~10
ALL 11 0, 11~15
ALL 12 5~20
ALL 0 0~1
PPC 0 0~1
PPC 0 0~1
PPC 130 120~170
PPC 130 0~300
Contents
Year /month /date /day /hour /minute /second Ex-
ample: 02 06 01 5 13 27 49
0:EUR 1:UC 2:JPN
0: External copy counter not used
1: Coin controller
2: Copy key card
3: Key copy counter
0: For factory shipment 1: For line
*Field: '0' must be selected
*Need to be checked when K-SRAM
was changed.
Timer to return the machine to the default
settings when the [START] key is not
pressed after the function and mode were
set
0: Max. (150 sec.)
1 to 10: Set number X 15 sec.
Timer to automatically switch to the en-
ergy saving mode when the copier has
not been used
0: Disabled 11: 15min. 12: 20min.
13: 30min. 14: 45min. 15: 60min.
Timer to automatically turn OFF the power
when the copier has not been used
5: 25min. 6: 30min. 7. 40min 8. 50min.
9: 60min. 10: 70min. 11. 80min.
12. 90min. 13. 100min. 14. 110min.
15. 120min. 16. 150min 17. 180min.
18. 210min. 19. 240min. 20. Not used
Setting of whether or not punching the
tab paper when both the tab and hole
punch functions are selected
0: No punch 1: Punch set
Setting of whether or not to reverse only
the back cover when inserting the back
cover at the inserter function
0: No reverse 1: Reverse set
Setting of whether or not to discharge
paper without reversing it when carrying
out a single-sided copying at SADF
0: Invalid (reversing)
1: Valid (no reversing)
Setting of the initial value for the tab
extension at the tab printing mode by
0.1mm
Setting of the initial value for the shift
amount at the tab printing mode by
0.1mm
Operation
procedure
1
1
1
1
1
1
1
1
1
1
1
1