Sharp AR-651 Service Handbook page 33

• Test mode (03): Refer to "2.2.1. Input check (test mode 03)" and "2.2.2. Outpout check (test mode 03)".
• Test print mode (04): Refer to "2.2.3. Test print mode (04)".
• Adjustment mode (05): Refer to "2.2.4. Adjustment mode (05)".
• Setting mode (08): Refer to "2.2.5. Setting mode (08)".
• List printing mode (9S):
(code)
[9] [START]
[POWER] 101: Adjustment mode(05)
102: Setting mode(08)
103: PM support mode
• PM support mode (6S):
[6] [START]
(code)
[POWER]
1: Auto-toner adjustment
2: PM management screen
• Firmware update mode (39): Refer to "6. FIRMWARE UPDATING".
Normal
*1
[0][1]
[CLEAR]
Control panel
Warming up
check mode
Standby
[POWER]
OFF
*2
To user
*1 In the "Control panel check mode", copying is disabled. Enter the standby state by pressing the
[CLEAR] key to start copying.
*2 Turn OFF the power after using the self-diagnosis mode, and leave the copier to the user.
(List starts to be printed)
(Operation started)
[POWER]
ON
[0][3] [0][4] [0][5]
Test print Adjustment
Test mode
mode mode
State transition diagram of self-diagnosis modes
2 - 9 AR-651/810 ERROR CODES AND SELF-DIAGNOSIS
[START] [POWER] OFF/ON
[START] [POWER] OFF/ON
[0][8] [9][START]
Setting List print
mode mode
(Exit)
(Exit)
[6][START] [3][9]
PM support Firmware
mode update mode