Sharp AR-651 Service Handbook page 317

4. The following is displayed if the serial connection was completed successfully.
Firmware Version Up Mode
Established serial connection with PC.
> Press START key to install new
firmwares.
> Please select a target with DIGITAL keys.
You can press [HELP] to confirm the current version (the version before the copier is updated).
*The engine firmware version cannot be displayed in this screen. Use the setting mode to confirm
them.
08-903 : Printer ROM version (LGC)
08-906 : PFC ROM version (LGC)
08-904 : Laser ROM version (PLG)
08-905 : Scanner ROM version (SLG)
Press [HELP] again to return to the above screen.
Firmware Version Up Mode
Established serial connection with PC.
F irmware Version Up Mode
Established serial connection with PC.
target version code
1 005.101 U
2 004.001 0
3 005.002 0
4 006.001 6
5 006.001 7
6 006.003 1 1
Press START key to next.
target version code
7 006.001 8
8 006.001 1 0
9 006.002 1 3
1 0 006.001 3
Press START key to previous.
6 - 21
Target: 1
Number of the target area for
updating
Target: 1
J or U is displayed.
[START] key
Target: 1
AR-651/810 FIRMWARE UPDATING