Advertisement
ASSEMBLY OF THE ALUMINUM THREADED BODY SHOCKS
NOTE: LEXAN SHOCK ASSEMBLY, SEE APPENDIX PAGES
Step 1
39030 - Lexan Shock Body.
37965 - Alum Threaded Shock Body.
37967
37100
P3
Washer
37967
O-Ring
(2 pcs)
C-Ring
(Block)
* The C-Ring must fit into
the groove.
FlLLING THE SHOCKS WITH OIL
Shock Oil
Oil
*Pull down piston and pour
oil into shock cylinder.
ASSEMBLY OF THE FRONT SHOCK INTO
SHOCK MOUNT
38329
Gray
6mm Alum.
Ball & socket
(Short)
* Snap On.
2mm E-Ring
37100
Piston
* Use the No.2 hole piston
38325
from shock plastic tree.
Shock Shaft
37080
Pressure Top
*Remove air bubbles by slowly
moving piston up and down.
37360
4mm
Ball & socket
Step 2
*Use a little shock oil to
lubricate o-Rings before
screwing on adjusting nut.
37650
4mm
Ball End
ASSEMBLY THE SHOCK SPRING
38326 - Black (std)
Shock Spring
37100
Spring Holder
ASSEMBLY OF THE FRONT SHOCK INTO
SHOCK MOUNT
M3x12
Screw
M3x12
Screw
37360
4mm
Ball & socket
* Insert the o-ring into
the groove of the adjust nut.
37966
P12 O-Ring
Oil
Oil
Oil
38331 - Gray
Adjust Nut
* Use the short ball end .
38330 - Gray
SHOCK Cap
37100
Ball End
( Short)
* Use the short shock
ball end.
38469 - Spring Set
38470 - Blue (s)
38471 - Yellow (m)
38472 - White (h)
* Snap On.
38282
6mm Alum.
Ball & socket
(Long)
Advertisement
