Download Print this page

Required For Operation - Ofna Racing LD3 Instruction Manual

1:10 scale nitro powered touring car

Advertisement

THINGS NEEDED
Glow Fuel
20%
AA Batteries ( 12 pcs )
#10212 NiHm Hump Pack,
see charger 10214.
TOOLS NOT INCLUDED IN KIT,
BUT NEEDED TO MAINTAIN YOUR CAR.
Phillips Type Screw Drivers ( L )
Phillips Type Screw Drivers ( S )
Needle Nose Pliers
Knife

REQUIRED FOR OPERATION

You will need to buy a few items to start the engine and run the car.
• Use 20% nitro CAR fuel. Do not use airplane or heli fuels, they will
over heat engine.
• Buy SHORT glow plugs, OFNA/PICCO Plug (#51007) are long
therefore use two copper washers. Use plugs without idle bar. Always
use two copper washers with Picco glow plugs.
In your box you will find..
• #10163 - Bottle, spout top or 10162 - Fuel Bottle
• #10218 - Red "C" or 10218 Red "D" size glow heater
These parts change depending on stock!
You need to get batteries for the radio transmitter and the car receiver
packs.
• Radio TX needs (8) eight AA batteries.
• Car needs (4) four AA Ni-cad batteries, Alkaline type batteries will
work, but braking will be reduced. The best is to use a 5 cell hump
pack for increased voltage..
Recommended Option:
You may want to upgrade the car battery pack to a Ni-Cad or NiHm 5
cell type(600AE). This will give more run time. OFNA #10212
Cutter
Curved Scissors
Glow Plug & 17MM Cross Wrench
#10801 $6.95
Instant Cement
Cross Wrench
#17109 $3.95
10214
Over-nite
Charger
Diff Oil -
Silicone

Advertisement

loading

This manual is also suitable for:

Ld-3 pro version