Table of Contents
Advertisement
One-time Explicit Transfer on the ISDN Line
FRITZ!Box Fon WLAN 7570 vDSL
One-time Explicit Transfer on the ISDN Line
Explicit Call Transfer (ECT) is an ISDN feature that must be
enabled by your ISDN provider and thus usually is subject
to extra charges. If ECT has not been enabled on your line,
you can program the telephone system to initiate a one-
time explicit call transfer before connecting to two parties.
When you end the connection, the other two parties will be
connected to each other.
One-time Explicit Transfer
N
Pick up the handset.
s32r
Dial the sequence shown at left. You hear the ex-
ternal dial tone.
M
Dial the external number of the first party. Talk.
R
Press the Hold button.
M
Dial the number for your second external call. You
can now conduct a second conversation while
your first call is on hold.
To clear your connections while allowing the ex-
ternal parties to continue the call, connect the
parties with each other.
R4
Dial the sequence shown at left. The connection
on hold and the active connection are connected
with each other. The external parties continue the
call while you clear the connection.
O
Hang up the handset.
With this type of external transfer, both parties are con-
nected to each other over your PBX. This means that both
B channels on your ISDN line remain busy with this con-
nection as long as the parties are connected to each other.
87
Advertisement
Table of Contents
