Table of Contents
Advertisement
Network Cable
1.2
WLAN Button
1.3
DECT Button
FRITZ!Box Fon WLAN 7570 vDSL
Network Cable
Additional network cable is required if you would like to
use all of the FRITZ!Box Fon WLAN 7570 vDSL network
ports.
The FRITZ!Box Fon WLAN 7570 vDSL network cable (yellow)
is a standard Ethernet cable. If you need a replacement ca-
ble, a longer cable or an extension, use a standard STP-type
(Shielded Twisted Pair, 1:1) CAT5 Ethernet cable. To extend
the cable you will also need a standard CAT45 double cou-
pling link to RJ5. You can use either straight cable or cross-
link cable. All components are available from specialized
vendors.
AVM recommends using a network cable no more than 100
meters long.
The FRITZ!Box is equipped with a WLAN button on the rear
panel of the housing.
The WLAN button can be used to activate and deactivate
WLAN.
The FRITZ!Box is equipped with a DECT button on the rear
panel of its housing. The DECT button has two functions:
1.
Ring to search for misplaced handsets (paging call):
If you press the DECT switch once briefly, the handset
will ring.
2.
Start the login procedure to register handsets:
How to register a DECT handset is explained in the
section "The DECT Function" from page 32.
115
Advertisement
Table of Contents
