Problems Related To Peripheral Devices; The Connected Usb Device Cannot Be Used; The Connected Usb Memory Cannot Be Used; The Finisher/Saddle Stitch Finisher Does Not Operate - Sharp MX-M564N Operation Manual

PROBLEMS RELATED TO PERIPHERAL DEVICES

Problem
The connected USB
device cannot be
used.
The connected USB
memory cannot be
used.
The finisher/saddle
stitch finisher does
not operate.
Stapling does not take
place.
Point to check
Is the USB device compatible with the
machine?
Is the connected USB device
recognized correctly?
Is the format of the USB memory
FAT32?
Are you using a USB memory with a
capacity of more than 32 GB?
Does a message appear indicating that
you need to remove paper from the
stapler compiler?
Does the following message appear in
the touch panel?
"Call for service. Code:xx-xx* Finisher
trouble."
*Letters and numbers appear in xx-xx.
Have functions been disabled by the
administrator?
Does a message appear instructing you
to check the staple unit?
Does a message appear instructing you
to add staples?
Is a different width of paper mixed in?
Are there more sheets than can be
stapled at once?
Is a paper size that cannot be stapled
included in the print job?
Ask your dealer if the device is compatible with the
machine.
Use "USB-Device Check" in the system settings to
check whether or not the device can be recognized.
Þ System Settings > "USB-Device Check"
If it is not recognized, connect it once again.
Check the USB memory device format.
If the format of the USB memory is other than FAT32,
use your computer to change the format to FAT32.
Use a 32 GB or less USB memory.
Remove all remaining paper from the stapler
compiler/saddle stitch finisher.
Check the plug of the connecting cable of the
finisher.
Plug and unplug the cable and after ensuring that it has
been properly plugged, restart the power supply to the
machine.
Check with your administrator.
Some functions may have been disabled in the system
settings (administrator).
Remove jammed staples.
+
"REMOVING STAPLE
Replace the staple cartridge.
Do not forget to replace the staple case.
+
"REMOVING STAPLE
To perform mixed size stapling, use paper of the
same width and select the [Same Width] setting.
Stapling is not possible when paper of different widths
are mixed together.
When copying, select [Same Width] from [Mixed Size
Original] in the special modes.
For the maximum number of sheets that can be
stapled, see "SPECIFICATIONS" in the Quick Start
Guide.
For the paper sizes that can be stapled, see
"SPECIFICATIONS" in the Quick Start Guide.
8-49
TROUBLESHOOTING
Solution
JAMS" (page 8-9)
JAMS" (page 8-9)
Contents