Storing Frequently Used Original Sizes; Storing Original Sizes (Editing/Clearing) - Sharp MX-M564N Operation Manual

Original
Size Input
2

STORING FREQUENTLY USED ORIGINAL SIZES

You can save special original sizes that you frequently use. This section explains how to store, retrieve, change, and
delete special original sizes.

Storing original sizes (editing/clearing)

Up to 12 special original sizes can be stored.
Touch the [Original] key in the base screen of copy mode and then follow the steps below.
Original
Auto
8½x14
Manual
5½x8½ 8½x11R
1
5½x8½R
8½x13
8½x11 8½x14
Size Input
(1), (2) (3)
OK
Cancel OK
X 17
(1~17)
inch
11
Y
(1~11 5/8)
inch
OK
11x17
AB
8½x13 Inch
Custom Size
Enter the original size.
(1) Enter the X (horizontal) dimension of the
original.
With the [X] key highlighted, enter the X (horizontal)
dimension of the original with the
document glass is used, a number from 1" to 17" (25 mm
to 432 mm) can be entered.
When the automatic document feeder is used, a number
from 5-1/2" to 17" (140 mm to 432 mm) can be entered.
If the horizontal dimension of the original is less than
5-1/2" (140 mm), use the document glass.
(2) Enter the Y (vertical) dimension of the
original.
Touch the [Y] key and enter the Y (vertical) dimension of
the original with the
glass is used, a number from 1" to 11-5/8" (25 mm to 297
mm) can be entered.
When the automatic document feeder is used, a number
from 5-1/8" to 11-5/8" (131 mm to 297 mm) can be
entered.
If the vertical dimension of the original is less than 5-1/8"
(131 mm), use the document glass.
(3) Touch the [OK] key.
You will return to the base screen.
Make sure that the entered dimensions appear in the
[Original] key.
Touch the [Custom Size] key.
2-28
COPIER
keys. When the
keys. When the document
Contents