System Settings (Administrator); Accessing The System Settings (Administrator); When User Authentication Is Not Enabled - Sharp MX-M564N Operation Manual

.
SYSTEM SETTINGS
(ADMINISTRATOR)
This section explains the system settings that are configured by the administrator of the machine.

Accessing the System Settings (Administrator)

To access the system settings (administrator), the administrator must log in as explained below.

When User Authentication is not Enabled

When "User Authentication
System Settings
Total Count
Paper Tray
Settings
1
Printer Condition
Settings
System Settings
Admin Password
Enter the administrator password. (From 5 to 32 characters)
Password
Press here for keyboard.
2
This completes the administrator login procedure. The system settings (administrator) can be used.
• User authentication is initially disabled (factory default setting).
• To logout...
Touch the [Logout] key in the top right corner of the screen. You can also touch the [Exit] key to quit the system settings.
(If Auto Clear activates, logout will automatically take place.)
Setting" (page 7-47) is not enabled, follow the procedure below to log in.
Admin Password Exit
List Print
Default Settings
(User)
Fax Data
Address Control
Receive/Forward
Document Filing
USB-Device Check
Control
Cancel OK
(1)
Touch the [Admin Password] key.
Log in.
(1) Touch the [Password] text box and enter
the administrator password.
(2) Touch the [OK] key.
(2)
7-28
SYSTEM SETTINGS
Contents