SADDLE STITCH FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below
to replace the staple cartridge.
Replacing the staple cartridge (finisher unit)
1
2
3
4
5
BEFORE USING THE MACHINE
Open the front cover.
While pulling the lever, slide the saddle
stitch finisher to the left until it stops.
Lower the staple case release lever and
remove the staple case.
Pull the staple case out to the right.
Remove the empty staple cartridge from
the staple case.
Insert a new staple cartridge into the
staple case as shown.
Push the staple cartridge in until it clicks into place.
1-54
Contents