KVH Industries TracVision R5 Owner's Manual page 44

TV/SAT Switch Controls and Indicators
The Select button is used for all operator controls. The TV/SAT
Switch also has three LED indicators that show its current status.
Table 3-1 explains the function of each indicator.
Table 3-1 TV/SAT Switch LED Indicators
Indicator Status
Sat A Blinking green
Solid green
Error Blinking red
Sat B Blinking green
Solid green
Connecting the TV/SAT Switch
To use the TV/SAT Switch, you must first connect it to the
TracVision system.
1. Connect the TV/SAT Switch's data cable to the
maintenance port on the switchplate (see
Figure 3-4).
Figure 3-4 Switchplate Maintenance Port
2. The Sat A and Sat B indicators blink while the
system initializes.
3. Either the Sat A or Sat B indicator will turn solid
green, denoting which satellite is currently being
tracked.
54-0157 Rev. J
Meaning
Wait – Searching for satellite
Tracking Satellite A
System problem – Refer to
Section 4, "Troubleshooting,"
to find the possible cause
Wait – Searching for satellite
Tracking Satellite B
Maintenance Port
(DB9 Connector)
Using Your TracVision R5/R4
3-5