Sealing The Cable Access Hole; Activating The Receiver - KVH Industries TracVision R5 Owner's Manual

Kvh industries satellitetelevision owner's manual tracvision r5, tracvision r4
Hide thumbs Also See for TracVision R5:
Table of Contents

Advertisement

A Guide to TracVision R5/R4
Ensure the clamshell mounting
screws do not puncture the cables
inside the vehicle.
2-14
4. Terminate all unused output connectors with
75 ohm DC blocks (Channel Master #7184, Radio
Shack #15-1259 or equivalent).

2.3.6 Sealing the Cable Access Hole

Once the RF and data/power cables are connected to the
antenna, you need to seal and cover the cable access hole to
protect against leakage.
1. Completely seal the cable access hole with silicone
sealant or RTV.
2. Install the clamshell ventilator, supplied in the
kitpack, over the cable access hole using the three
supplied #6 screws (see Figure 2-16).
Figure 2-16 Installing the Clamshell Ventilator
#6 Screws
Clamshell
Ventilator
2.4

Activating the Receiver

DIRECTV and DISH Network Receiver Activation
KVH makes it easy to activate your DIRECTV or DISH Network
receiver. Just call KVH at 1-888-584-4163 and ask for Receiver
Activation (Monday - Friday, 8:30 a.m. - 5:00 p.m. ET). For other
options, please refer to your receiver's User Manual.
Other Receiver Activations
Please refer to the receiver's User's Manual for activation
instructions.
RF & Data/Power
Cables
Cable Access Hole
(in Roof of Vehicle)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tracvision r4

Table of Contents