Viewing The Hdmi®Signal Information; Changingthe Hdmi® Input Mode - Toshiba 65L9400U User Manual

Basicfeatures 93
Viewing the HDMf _ signal infi_rmatio
Viewingthe HDMI ® signalinformation
1 Press the MENU button.
2 Select Options > HDMI Information Display and press the OK
button.
3 Press the A/Y (arrow) buttons to select On.
4 Press the INFO button.
iP4 ....
HDMI Information is shown (Resolution, Scan Type, Frame Rate,
Aspect, Bit Depth, Color Space, RGB/YUV, Chroma Format), and
the normal banner and signal information bam_er appear.
NOTN ,*,oThesignalinformation banner will appear whenthis feature is setto
Onandyouwatchan HDMI ® inputand presstheINFObutton.The
signalinformation will disappear a fter60 seconds.
¢ If youpresstheNFO buttonwhenthis feature is setto Off,onlythe
normalbanner will appear.
Changing t he HDMI ® InputMode
Change this when the 4K UHD picture signal that is being output from a
4K UHD device connected to HDMI IN 2 or 3 is a high speed signal.
•:* Normally you should use the default setting (Mode 2).
1 Change the input to the HDMI input you wish to change (HDMI 2
or HDMI 3)
2 Press the MENU button.
3 Select Options > Input Options > HDMI2 Input Mode or
HDMI3 Input Mode and press the OK button.
4 Press the A/Y (arrow) buttons to select Mode I or Mode 2.
Mode 1: Select this when you want to ptay 4K UHD pictures from
a 4K UHD compliant device in higher definition. If the
pictures do not display properly, select Mode 2.
Mode 2: This is the default mode (Mode 2 is compliant with 4K
UHD picture signals)
NOTN .:. Node 1 supports thefollowing4K UHDpicture signals.
Supported upperbit ratelimit: 6 Gbps
4K picturesignal:4:4:4 or 4:2:2 60 Hz
Basedon interimtestingstandards. Specifications a resubjectto
change.