Table of Contents
Advertisement
Initial Setup and Menu
_
Performing the initial set
t,l _.,I
8
IRBlaster
Select Next or Skip
•:.
To start the IR Blaster setup, select Next on the screen, or to
skip the setup, select Skip If you skip this setup, you can setup
the IR Blaster at any time through the Installation
> IR Blaster
Setup menu
NOTE
TheIRBlaster maynotworkwithsomedevices, a ndit maynotcontrol
certainfeatures on yourexternal d evices.
Selling the IR Blaster
IR Blaster Setup
1
Select Add onthe screen
Device Type screen wilt appear
Device Type
1
Select Device Type, and use the 4/_
(arrow) buttons to select
a device type from the following:
•:.
Cable Box
•:o Satellite Box
•:o VCR
•:o Blu-ray, DVD Player
o**oReceiver, Misc Audio
o:. Amplifier
o**oCD Player
°:* Video Accessory
2
Press the Y button then press the GREEN button.
The Brand screen wilt appear.
3
Use the A/Y (arrow) buttons to select the brand name then
press the OK button.
o:* Select a field and press the OK button to show the
software keyboard. Enter the first few characters of the
brand name and press the GREEN button. The brand
name starting with the entered characters wilt appear on
the Brand screen.
4
Press the OK button.
Model Name screen wilt appear.
Advertisement
Table of Contents
