Table of Contents
Advertisement
Advancedfeatures
1 2 7
Setting up the Network
EasySetup using PBC (Push buttonconfiguration)
Press the MENU button.
1
2
3
4
5
6
7
Select Network > Network Setup > Wireless Setup and press the
OK button
Press the A/Y (arrow) buttons to select Easy Setup and press the
OK button.
Press the A/Y (arrow) buttons to select PBC.
Press the Y (arrow) button to select Start Scan, and then press the
OK button.
Following the on-screen instructions, push the appropriate button on
your AR
When a screen reporting that "Wireless Configuration is complete"
appears, press the OK button.
To cancel searching for the AP:
•:.
Press the BACK button while searching for the AP. A message
appears. Press the 4/_" (arrow) buttons to select Yes, and then press
the OK button.
EasySetup using PIN (Personal Identification Number)
1
Press the MENU button.
2
Select Network > Network Setup > Wireless Setup and press the
OK button.
3
Press the A/Y (arrow) buttons to select Easy Setup and press the
OK button.
4
Press the A/Y (arrow) buttons to select PIN.
5
Press the Y (arrow) button to select Start Scan, and then press the
OK button.
The Scan screen appears.
6
Enter the PIN displayed on this screen into your computer or AP.
7
Press the A/Y (arrow) buttons to select the desired AP, and then
press the OK button.
NOTN
ChecktheMACaddress on the labelor in themanual o f theAP andselect
an AP.
8
When a screen reporting that "Wireless Col_guration
is complete"
appears, press the OK button.
Advertisement
Table of Contents
