Viewing Channel Information; Viewing Hdmi Information - Toshiba 28L110U Instruction Manual

28L110U/32L110U Toshiba 28"/32" 720p 60Hz LED TV

Viewing channel information

Press INFO or RECALL. The following status
information is displayed:
• Current video input (for example ANT/CABLE or
AV)
• If ANT/CABLE is the current video input, either
CABLE (for cable TV) or ANT (for over-the-air
broadcasts)
• If ANT/CABLE is the current video input, channel
number
• Digital signal strength indicator
• If the audio mode is analog, Stereo, Mono, or
SAP analog audio status
• If the input mode is HDMI®, Dolby® Digital, or
PCM
• Video resolution
• Aspect ratio of incoming video signal (4:3 or
16:9)
• TV program or movie rating
• GameTimer (if set)
Pressing INFO also displays the following status
information for digital channels:
• Title
• Duration
• Detailed program description
Note
If you pressed INFO, press INFO again to
close the banner.

Viewing HDMI information

When HDMI Information Display is set to On in the
Options menu and you press INFO, the HDMI
Information banner opens and displays the following
information:
• Resolution
• Scan Type
• Frame Rate
• Aspect
• Bit Depth
• Color Space
• RGB/YUV
• Chroma Format
When the HDMI Information Display is set to Off,
the normal banner is displayed.
1 Press MENU, press
then press ENTER.
2 Highlight HDMI Information Display, then press
ENTER.
3 Highlight On or Off, then press ENTER.
4 Press EXIT to close the menu.
www.tv.toshiba.com
or to highlight Options,
45