Selectingthe Optical Audiooutputformat - Toshiba 65L9400U User Manual

Picture and Sound Controls 1 2 1
Adjusting the audi
Selectingthe optical audiooutputformat
You can select the optical audio output format when you connect a
Dotby :_Digital and/or DTS _'decoder or other digital audio systems to the
TV's Digital Audio Out terminal.
Audio Format
1 Press the MENU button.
2 Select Sound > Digital Audio Output > Audio Format and press
the OK button.
3 Press the A/Y (arrow) buttons to select Auto or PCM.
4 Press the EXIT button.
Audio Delay
1 Press the MENU button.
2
Select Sound > Digital Audio Output > Audio Delay and press the
OK button.
Press the
Auto:
Manual:
A/Y (arrow) buttons to select Auto or Manual.
This mode automatically adjusts the audio timing to meet
the video tinting.
The time lag might be large between the image and sound
depending on the connected equipment (amplifier etc.). In
that case, select Manual.
You can manually adjust the audio signal timing to meet
the video signal timing.
4 Press the EXIT button.