Language; Display Settings - Jura GIGA 5 Instructions For Use Manual

4 Permanent settings in programming mode

Language

Display settings

36
T Press the 'Yes'
'Saved' appears briefly on the display.
'Factory setting'
T Press the P button to exit programming mode.
O
'Please select product:'
In this program item you can set the language used by your GIGA.
Example: Proceed as follows to change the language from
to 'Deutsch'.
Precondition:
'Please select product:'
T Press the P button.
O
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the program item
tings (4/5)' is displayed.
T Press the 'Choose language'
'Choose language'
E To display more languages, press the
right).
T Press the 'Deutsch'
'Gespeichert' appears briefly on the display.
'Geräteeinstellungen (4/5)'
T Press the P button to exit programming mode.
O
'Bitte wählen Sie Ihr Produkt:'
In the program item 'Machine settings (4/5)'
the following settings:
U
'Brightness' (as percentages)
U
'Contrast' (high, normal, low)
U
'Backlight' (backlighting; as percentages)
Example: Proceed as follows to change the brightness of the display.
Precondition: 'Please select product:'
T Press the P button.
O
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the program item
tings (4/5)' is displayed.
T Press the 'Display'
'Display'
button.
is displayed.
button.
button.
is displayed.
button.
'English'
'Machine set-
'Next' button (bottom
/ 'Display' you can make
'Machine set-