Setting The Consistency Of Grind - Jura GIGA 5 Instructions For Use Manual

Setting the consistency
of grind
T Press the '+' or
of milk to '6 sec.'.
T Press the 'Save'
T Press the 'Amount of milk foam'
T Press the '+' or
of milk foam to
T Press the 'Save'
T Press the 'Volume'
T Press the '+' or
ume to '1.0 oz'
T Press the 'Save'
T Press the P button to exit programming mode.
O
'Please select product:'
In the program item
grind' you can adjust both grinders separately to the degree of roast
of your coffee.
The consistency of grind setting is correct if the coffee flows regu-
larly from the dual spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind for
the grinder on the right.
Precondition:
'Please select product:'
T Press the P button.
O
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the program item
tings (2/5)' is displayed.
T Press the 'Set consistency of grind'
'Set consistency of grind'
T Press the 'Right grinder'
'Right grinder'
T Press the '+' or
sistency of grind.
T Press the 'Save'
'Saved' appears briefly on the display.
'Set consistency of grind'
T Press the P button to exit programming mode.
O
'Please select product:'
4 Permanent settings in programming mode
'–' button to change setting for the amount
button.
button.
'–' button to change setting for the amount
'14 sec.'.
button.
button.
'–' button to change setting for the fill vol-
(40 ml).
button.
'Product settings (2/5)'
is displayed.
button.
button.
'–' button to change the setting for the con-
button.
/ 'Set consistency of
'Product set-
29