First-Time Use - Jura GIGA 5 Instructions For Use Manual

First-time use

J WARNING
T Fill the bean container with coffee beans and close the
aroma preservation cover.
If the machine is operated with a defective power cord, there is a
danger of potentially fatal electric shock.
Never use a machine which is damaged.
T
Never use a machine which has a defective power cord.
T
E The water volume is given as standard in 'oz'. You can change
this setting to 'ml' in programming mode (see Chapter 4 'Per-
manent settings in programming mode – Unit for amount of
water').
During first-time use, you can choose between the
tion' and the 'Standard
U
'Quick installation': After setting the time and date, your GIGA
is ready for use.
U
'Standard installation': Here, you can also decide whether you
want to operate your GIGA with or without a CLEARYL Blue
filter cartridge. If the water hardness is 10° dH or more, we
recommend using the filter cartridge. If you do not know
the hardness of your water, you can find this out first (see
Chapter 1 'Preparing and using for the first time – Deter-
mining the water hardness').
U
'Use filter' / 'Active': Here, you can fit the CLEARYL Blue filter
cartridge. Descaling will no longer be necessary.
U
'Use filter' / 'Inactive': Here, you can set the water hardness
of the water used. This setting influences when your GIGA
prompts you to perform descaling.
Precondition: The water tank and bean containers have been filled.
T Connect the mains cord to the machine.
T Insert the power plug into a power socket.
3 T Switch on the GIGA using the power switch on the back of
the machine.
Q T Press the On/Off button to switch the GIGA on.
'Welcome to JURA'
shows the languages you can choose from.
1 Preparing and using for the first time
installation'.
appears on the display. The display then
'Quick installa-
11