Specific Safety Rules And Precautions - Chicago Electric 95126 Assembly And Operating Instructions Manual

tools "Do not use" until repaired.
5. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool's operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly
maintained tools.
6. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
1. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow
instructions in the "Inspection, Maintenance, And Cleaning" section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.

SPECIFIC SAFETY RULES AND PRECAUTIONS

1. WARNING! Your Warranty is voided if:
A. You do not put engine oil in the Engine's crankcase prior to its first use.
Before each use, check the oil level. Never run the Engine with low or no
engine oil. Running the Engine with low or no oil will permanently damage the
unit.
2. Maintain labels and nameplates on the Generator. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
3. Make sure the Generator is located on a flat, level, sturdy surface capable
of supporting the weight of the Generator and any additional tools and
equipment.
4. Industrial applications must follow OSHA guidelines.
5. Never stand on the Generator. Serious injury could result if the Generator
is tipped.
6. Never leave the Generator unattended when it is running. Turn off the
Engine before leaving.
SKU 95126 For technical questions, please call 1-800-444-3353
SERVICE
PAGE 4