Features - Fujitsu D1031 Technical Manual

Features

•
Dual processor system (D1031 dual: second processor optional)
•
Pentium II, 350 up to 450 MHz and Pentium III, 500 MHz with 100 MHz bus frequency, with
integrated 2x16 Kbyte first-level cache and 512 Kbyte second-level cache
•
Upgrade with second Pentium II/ III processor
•
Intel 82440GX chipset with ISA bridge
•
72-bit data bus (64-bit data and 8-bit ECC)
•
Voltage regulators which sets themselves automatically to the required voltage range (1.5 V to
3.5 V)
•
64 Mbyte to 2 Gbyte main memory for buffered SDRAM DIM modules,
ECC protected (max. 4 modules)
•
4 Mbit Flash BIOS
•
6 PCI slots, 1 ISA/PCI slot (shared), all PCI slots have bus master capability
•
AGP slot for AGP screen controller
•
Screen controller connected to PCI bus, graphics processor Cirrus Logic CL-GD5446, 2 Mbyte
DRAM video memory
•
Ultra 2-SCSI controller SYM 53C895 with SCSI bus extension SYM 53C141
•
IDE hard disk controller connected to PCI bus for two IDE drives
•
System boot from SCSI CD-ROM is possible
•
Real-time clock/calendar with integrated battery backup
•
Floppy disk controller (up to 2.88 Mbytes format)
•
Connectors for two fans, temperature sensor, I
drive, IDE disk drive, control panel and service, SCSI LED
•
Loudspeakers
•
Security functions in BIOS
•
Fujitsu Siemens-ASIC for Server Management
•
Server management support
•
CAN bus interface for control of external drive cabinets
•
USB port (internal and external)
•
Connector for soft-off, reset switch, cover monitoring
•
Connector for remote-on, programmable
•
Connector for chipcard reader
•
Monitor port
•
Parallel port (ECP- and EPP-compatible)
•
Two serial ports (compatible 16550, 16-Byte-FIFO)
•
PS/2 mouse port, PS/2 keyboard port
A26361-D1031-Z120-10-7419
2
C, remote-On/Off, Wake-On-LAN, floppy disk
Features
English - 3