Skipper GDS101 Operation And Installation Manual
  1. Manuals
  2. Brands
  3. Skipper Manuals
  4. Marine Equipment
  5. GDS101
  6. Operation and installation manual

Skipper GDS101 Operation And Installation Manual

Graphic depth sounder
Hide thumbs Also See for GDS101:
Table of Contents

Advertisement

Quick Links

Operation and Installation Manual
SKIPPER Electronics AS Telephone:
Enebakkveien 150
P. O. Box 151, Manglerud
0612 Oslo, Norway
www.skipper.no
Graphic Depth Sounder
GDS101
+47 23 30 22 70
Telefax: +47 23 30 22 71
E-mail: support@skipper.no
Co. reg. no:NO-965378847-MVA
Document no: DM-G001-SB
Rev: 1414A
For sw ver 05.05.16 - 5.05.17
Edition: 2014-04-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GDS101 and is the answer not in the manual?

Questions and answers

Related Manuals for Skipper GDS101

Summary of Contents for Skipper GDS101

  • Page 1 Graphic Depth Sounder GDS101 Operation and Installation Manual SKIPPER Electronics AS Telephone: +47 23 30 22 70 Document no: DM-G001-SB Enebakkveien 150 Telefax: +47 23 30 22 71 Rev: 1414A P. O. Box 151, Manglerud E-mail: support@skipper.no For sw ver 05.05.16 - 5.05.17 0612 Oslo, Norway Co.
  • Page 2 SKIPPER Electronics AS GDS101 Operation and Installation Information: Please visit our web site www.skipper.no for additional information. Here you will find product bulletins, software updates, instruction manuals, installation procedures etc. Weitergabe sowie vervielfältigung dieser unterlage, verwertung Copying of this document, and giving it to others and the use...

  • Page 3: Table Of Contents

    Repeaters ..................................9 Remote Sounding Control .............................9 Autorange ..................................9 Sound Speed Calibration ...............................9 Fig. 1.3 GDS101 Primary Functions........................ 10 2. OPERATION ..........................11 Parameter entry ..............................11 Fig. 2.1 Setting and Parameter Entry Flowchart ....................11 Example of parameter entry ............................12 Operation Screens ............................
  • Page 4 SKIPPER Electronics AS GDS101 Operation and Installation External Printer Operation ............................26 Alarm Settings ................................26 Alarm acknowledgement ............................27 Alarm ID ..................................27 Audio warning ................................27 Clock and Calendar Settings ............................27 History Memory ................................27 Simulator ..................................28 Status Screen ................................28 Oscilloscope Screen ..............................28 Nonvolatile Flash Parameter Memory ........................28 Options ................................
  • Page 5 SKIPPER Electronics AS GDS101 Operation and Installation Remote Keyboard................................50 Remote Sounding Control............................50 5. START-UP AND SYSTEM ADAPTION ..................51 System Adaptation ............................51 Analogue Output and Log Pulse Input Range Selection .....................51 Language and Units of Measure ..........................51 Remote Transducer Selector ............................51 Low frequency indication ............................51...

  • Page 6: Introduction

    61162-1:2007(E) (NMEA 0183) inputs and outputs. Transducers GDS101 is prepared for connection to transducers of the following frequencies: 38, 50 and 200 kHz. One or more of the transducers may be connected at the same time, and the desired transducer may be selected from the operator panel.

  • Page 7: Recorded Data Storage

    Chapter: 1. Introduction SKIPPER Electronics AS GDS101 Operation and Installation Recorded Data Storage The measured depth and other navigational data is continuously stored in the 24 hour history memory. A standard printer HP Deskjet or Epson D88/LQ300 (all with Centronics parallel interface) may be connected for paper copy.

  • Page 8: Fig. 1.2 System Diagram

    Chapter: 1. Introduction SKIPPER Electronics AS GDS101 Operation and Installation Navigator IR301 NMEA 0183 Depth repeater Speed log NMEA 0183 NMEA 0183 Cabinet 100/200 ppnm External printer 230/115 VAC/24 VDC 2 x 2.5 sq. mm. Screened Computer system Yard Supply...

  • Page 9: Interfacing

    Remote Sounding Control * This option lets the GDS101 being remote controlled in synchronized, burst or single ping modes. Autorange This option will automatically adjust the depth range to maintain the bottom contour within the middle half of the screen.

  • Page 10: Fig. 1.3 Gds101 Primary Functions

    Setting. Setting vision Backlight Rotate encoder while Press the Screen Select keeping a key pressed Button repeatedly to cycle to change setting through the primary or menu/screen "Soft-Key" Screens Fig. 1.3 GDS101 Primary Functions Page 10 of 70 Edition: 2014.04.01...

  • Page 11: Operation

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation 2. Operation When the installation is complete, and power is connected to the operator unit, the system is switched on-off by power switch(es) inside the cabinet. See “Fig. 4.4. Voltage selection connectors and fuses, terminal board.”...

  • Page 12: Example Of Parameter Entry

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Example of parameter entry Suppose you want to enter a value of 800 m for the depth range. Press the DEPTH RANGE button several times and observe the depth range sequencing through the standard values 10, 50, 100, 500, 1000 m. Press till the range is 500 m.

  • Page 13: Primary Operation Screens

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Primary Operation Screens Fig. 2.2. Screen 1, Primary Operation screen. This screen shows the main graphic echo gram. Left hand digital indication may be enabled from screen 2. Soft key...

  • Page 14: Fig. 2.3. Screen 2, 2Nd Operation Screen

    “Dimmed”). Not used. SYSTEM On/off Switch system off. Switch on with any button. (NOTE: There is still power on the GDS101). * Note: 38 kHz may vary if other frequency options are installed. Page 14 of 70 Edition: 2014.04.01...

  • Page 15: Fig. 2.4. Screen 3, 3Rd Operation Screen

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Fig. 2.4. Screen 3, 3rd Operation screen. This screen shows the main graphic echo gram. Left hand digital indication may be enabled from screen 2. Soft key Name Range/value Default value...

  • Page 16: Secondary Operation Screens

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Secondary Operation Screens 6 ) . ) . Fig. 2.5. Screen 4, Calendar and clock setting. This screen shows the main graphic echo gram. Left hand digital indication may be enabled from screen 2.

  • Page 17: Fig. 2.6. Screen 5, Language And Units Of Measure Setup

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Fig. 2.6. Screen 5, Language and units of measure setup. This screen shows the main graphic echo gram. Left hand digital indication may be enabled from screen 2. Soft key...

  • Page 18: Fig. 2.7. Screen 6, Interface Setup Screen

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Fig. 2.7. Screen 6, Interface setup screen. This screen shows the main graphic echo gram. Left hand digital indication may be enabled from screen 2. Soft key Name Range/value Default value...

  • Page 19: Fig. 2.8. Screen 7, History Memory Control Screen

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Fig. 2.8. Screen 7, History Memory Control Screen. This screen shows the main graphic echo gram. Left hand digital indication may be enabled from screen 2. Soft key Name Range/value...

  • Page 20: Fig. 2.9. Screen 8, Nmea Control Screen

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Fig. 2.9. Screen 8, NMEA control screen. This screen shows list of received or transmitted NMEA messages and half screen echogram. Soft key Name Range/value Default value Description SCREEN Print Print screen.

  • Page 21: Fig. 2.10. Screen 9, System Status Screen

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Fig. 2.10. Screen 9, System status screen. This screen shows a comprehensive list of system settings and parameters Soft key Name Range/value Default value Description SCREEN Print Print screen. PRINTER...

  • Page 22: Fig. 2.11. Screen 10, Oscilloscope Screen

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Fig. 2.11. Screen 10, Oscilloscope screen. This screen shows receiver output versus time and half screen echo-gram. Soft key Name Range/value Default value Description SCREEN Print Print screen. TRANSDUCER 38, 50, 200 kHz 50 kHz Transducer selection for soft key 3.

  • Page 23: Principal Functions

    Principal Functions Bottom detection GDS101 employ a bottom detection algorithm that will try to extract the bottom signal from all kinds of noise and secondary echoes. When GDS101 is tracking the bottom normally, a thick black line is shown, and below that, a ribbon with a hatched pattern.

  • Page 24: Fixed Key Functions

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Fixed Key Functions Depth Range The DEPTH RANGE button can be used to set the depth limit between 10 and 1600 m. Standard values available by repeatedly pressing the button are 10, 50, 100, 500 and 1000 m.

  • Page 25: Soft Key Functions

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Soft key Functions Gain The received signal gain may be adjusted from 0 to 100 % to allow for optimal echo levels from bottom and other objects. The gain setting affects signals from all depths. See “Fig.

  • Page 26: External Printer Operation

    Keel Draught -value Draught -value DBS: DBT: DBK: Note: DBS: DBT: DBK: Depth Depth Depth GDS101 is a one channel Depth Depth Depth echo sounder. You can Below Below Below Below Below Below set one draught value for Surface Trans-...

  • Page 27: Alarm Acknowledgement

    “Fig. 2.5. Screen 4, Calendar and clock setting.” on page 16. History Memory GDS101 has a 24 hour history memory. Depth, time and all available navigation data are stored continuously, so that the last 24 hours of information is always available. The history memory is controlled from screen 7.

  • Page 28: Simulator

    Each new file will have the full settings in the first lines. Simulator The GDS101 contains a built in simulator to test the screen and various interface signals. The simulator may be switched on and off on screen 9. When the simulator is operating, “DEMO” is flashing at the bottom of the screen.

  • Page 29: Auto Range

    Chapter: 2. Operation SKIPPER Electronics AS GDS101 Operation and Installation Auto Range This option will automatically adjust the depth range to maintain the bottom contour within the middle part of the screen height. If installed, this option is accessible on screen 3. See “Fig.

  • Page 30: User Maintenance

    No picture on LCD screen. No AC or DC power to the Check switches and fuses on the terminal system. board inside the GDS101 cabinet. 2. System is in standby. Press any button on panel. 3. Too low screen backlight.

  • Page 31: Typical Status Screen (9) Contents

    If it at all is possible to cycle through the screens and observe this information, several assumptions may be made regarding operation of the GDS101 system. Although some of the subsystems necessary for this basic system operation may still suffer from minor or intermittent operation disorders, the fact that it is possible to select and observe this screen, indicate correct operation of the following GDS101 subsystems: •...
  • Page 32 Chapter: 3. User Maintenance SKIPPER Electronics AS GDS101 Operation and Installation Symptom Cause Remedy Status screen diagnosis Main voltages out of range • Defective power • Replace terminal board. • + 5 V: <> 4.50 - 5.00 V supply. •...

  • Page 33: Typical Oscilloscope Screen (10) Contents

    Chapter: 3. User Maintenance SKIPPER Electronics AS GDS101 Operation and Installation Typical Oscilloscope Screen (10) Contents Speed indication from Time indication, Position from GPS Heading indication GPS/speed log manual or from GPS from GPS 15:03 GMT N 13°13.20' E 079°44.5' 14kts 145°...

  • Page 34: Basic Functionality

    Swap NMEA 0183 input wires. listed in the NMEA screen. • NMEA input signals are listed • GDS101 initialization. • Cycle GDS101 power after NMEA in the NMEA screen, but not • Irregular message mnemonic. connection is established. accepted by the GDS101. •...

  • Page 35: Installation

    Bottom view in speeds > 4-5 knots Refer to SKIPPER’s installation procedures in the appendix and on our web site www.skipper.no regarding information about sea valve, tank installation, welding, cable glands etc. Note: Protect the active element of the transducer and do not paint the surface.

  • Page 36: Fig. 4.1. Basic System Configuration

    Chapter: 4. Installation SKIPPER Electronics AS GDS101 Operation and Installation Cabinet 230/115VAC/24VDC 2 x 2.5 sq. mm. Screened Yard Supply Superstructure Transducer Junction Box Hull 1 pair each xducer, 1.5 mm 0-100m cable 2.5 mm 100 -300m cable Steel screened...

  • Page 37: Transducer Junction Box

    Chapter: 4. Installation SKIPPER Electronics AS GDS101 Operation and Installation Transducer Junction Box The standard cable fitted on the transducer is 25 m or 40 m and may be shortened. The junction box is used to interconnect the transducers fixed cable to a yard supply extension cable if the total required cable length is longer than the standard cable.

  • Page 38: Operator Unit Installation

    Chapter: 4. Installation SKIPPER Electronics AS GDS101 Operation and Installation Operator Unit Installation Fig. 4.3. Operator Unit. Page 38 of 70 Edition: 2014.04.01...

  • Page 39: 115/230 V Selection

    “Interfacing” on page 115/230 V Selection If the AC power system is 115 V, GDS101 may be prepared for 115 V AC by re-connecting the connectors J102, J103 as shown in “Fig. 4.4. Voltage selection connectors and fuses, terminal board.” on page 40.

  • Page 40: Fig. 4.4. Voltage Selection Connectors And Fuses, Terminal Board

    Chapter: 4. Installation SKIPPER Electronics AS GDS101 Operation and Installation Transformer primary 230 V AC Transformer primary 115 V AC 115/230 V AC fuse 1 A/0.5 A 24 V DC fuse 3.15 A 115/230 V AC connection 115/230 V 24 V DC...

  • Page 41: Fig. 4.5. History Memory Battery Jumper, I/O Board

    Fig. 4.5. History Memory Battery Jumper, I/O Board. Note: In the latest GDS101 versions, (starting from Sw 5.05.02) CMOS memory for storing “history” is not used. Here all values are stored on the Compact Flash. The jumper JP101 and battery BT100 is present only for backward compatibility.

  • Page 42: Fig. 4.6 Function Leds, Terminal, I/O And Cpu Boards

    Chapter: 4. Installation SKIPPER Electronics AS GDS101 Operation and Installation LD300 on IO board LD400 - LD403 on terminal board Power indication and function LEDs Terminal board Indicating Colour LD400 + 5 V Green LD401 + 12 V Yellow LD402...

  • Page 43: Fig. 4.7. Main Wiring Diagram

    Chapter: 4. Installation SKIPPER Electronics AS GDS101 Operation and Installation Fig. 4.7. Main Wiring Diagram. Page 43 of 70 Edition: 2014.04.01...

  • Page 44: Fig. 4.8. Input/Output Circuitry

    Chapter: 4. Installation SKIPPER Electronics AS GDS101 Operation and Installation Fig. 4.8. Input/Output Circuitry. Page 44 of 70 Edition: 2014.04.01...

  • Page 45: Interfacing

    Chapter: 4. Installation SKIPPER Electronics AS GDS101 Operation and Installation Interfacing Alarm relay An alarm relay is provided for interconnection to external alarm systems. This relay is normally energised, and is released by alarm conditions or power failure/power off. See “Fig.

  • Page 46: Transmitter Trigger Pulse And Bottom Pulse Outputs

    GDS101 Operation and Installation Transmitter trigger pulse and bottom pulse outputs These outputs can be used to connect a repeater e.g. SKIPPER IR201, or to synchronize other hydroacoustic equipment to avoid interference. See “Fig. 4.7. Main Wiring Diagram.” on page 43 “Fig.

  • Page 47: Fig. 4.10. Data Communication Interfaces

    Chapter: 4. Installation SKIPPER Electronics AS GDS101 Operation and Installation Fig. 4.10. Data Communication Interfaces. Page 47 of 70 Edition: 2014.04.01...

  • Page 48: Fig. 4.11. Alarm Interconnections

    Chapter: 4. Installation SKIPPER Electronics AS GDS101 Operation and Installation Fig. 4.11. Alarm interconnections Page 48 of 70 Edition: 2014.04.01...

  • Page 49: External Interface Ports

    Chapter: 4. Installation SKIPPER Electronics AS GDS101 Operation and Installation External Interface Ports Ground Stud. 5 x PG 13.5 cable entry 10-12 mm. XJ303: NMEA ports D-type 9 pin female. XCN6: VGA terminal HDD D-type 15 pin female. XCN3: Printer port D-type 25 pin female.

  • Page 50: Options

    Hand controller connection Remote Sounding Control. This option lets the GDS101 being controlled remotely in synchronised (edge), burst (level) or single ping modes. If installed, these options are accessible on “Fig. 2.4. Screen 3, 3rd Operation screen.” on page 15.

  • Page 51: Start-Up And System Adaption

    Chapter: 5. Start-up and system Adaption SKIPPER Electronics AS GDS101 Operation and Installation 5. Start-up and system Adaption System Adaptation Analogue Output and Log Pulse Input Range Selection From “Fig. 2.7. Screen 6, Interface setup screen.” on page 18 it is possible to set number of pulses per nautical mile (100, 200, 400 and 20000) for the log pulse input.

  • Page 52: Nmea Setup

    EN250. Note: Normaly not used on GDS101. [Fore/Aft] transducer $SDXDR,D,x,x,M,c-c,<Cr><Lf> Set alarm state $SDALR,hhmmss.ss,xxx,A,A,<Alarm message> *hh<CR><LF> 1) In case of multiple transducer installation, the following SKIPPER proprietary sentence must be selected: $PSKPDPT,x.x,x.x,x.x,xx,xx,c--c*hh<CR><LF> Check sum, possible to turn on/off (see screen 8) Transducer location *...

  • Page 53: Nmea Received/Input Messages

    $PSKPSIM,x.x*[CS][CR][LF], where x.x is a simulated depth value. If the depth value is valid (0 - 1600 m), GDS101 will get into simulation mode, where this value is used for all indications and outputs (analogue, NMEA, bottom pulse). The “synthetic” bottom pulse which is generated can be observed on the echogram, “Fig.

  • Page 54: Options

    Chapter: 5. Start-up and system Adaption SKIPPER Electronics AS GDS101 Operation and Installation Options Calibration, Sound Speed The only calibration activity necessary is when the sound speed option is installed. In this case, set the required sound speed value in “Fig.

  • Page 55: Specifications, Dimensions

    Chapter: 6. Specifications, Dimensions SKIPPER Electronics AS GDS101 Operation and Installation 6. Specifications, Dimensions Transducer, 38 kHz Diameter. 181 mm. Mounting. Tank/sea valve/ice tank. Cable length. 40 m. Weight. ca. 20 kg. Protection. IP 68. Transducer, 50 kHz Diameter. 90 mm.

  • Page 56: Functional Properties

    Chapter: 6. Specifications, Dimensions SKIPPER Electronics AS GDS101 Operation and Installation Functional Properties Display. 10,4” 158 x 211 mm graphic LCD screen with adjustable day/night vision and backlight. 640 x 480 pixels. Printer. HP Deskjet, Epson D88 or Epson LQ300.

  • Page 57: Transducer And Junction Box

    Chapter: 6. Specifications, Dimensions SKIPPER Electronics AS GDS101 Operation and Installation Environmental according to IEC60945: Transducer and Junction Box Operating temperature. -15 - 55 degree C IEC 60945. Storage temperature. -20 - 70 degree C. Protection, transducer. 6 bar, IP 68.

  • Page 58: Service

    Chapter: 7. Service SKIPPER Electronics AS GDS101 Operation and Installation 7. Service • All service requests should be made to your local representative or to the manufacturer. (Contact information on title page). • Adjustments and repairs should only be performed by qualified service engineers.

  • Page 59: Cpu Board Setup Procedure

    Chapter: 8. CPU Board Setup Procedure SKIPPER Electronics AS GDS101 Operation and Installation 8. CPU Board Setup Procedure • Connect a PC keyboard and a VGA screen to the CPU board. • Switch “On” the unit while pressing “Delete” key on the PC keyboard.

  • Page 60: Master Reset Procedure

    Then press down and keep pressed the soft key to the far right and far left (no. 1 and 6) in the upper row on the GDS101 keyboard. • Turn the GDS101 ‘’on’’ and keep the two soft keys pressed down until you hear 4 ‘’beeps’’ and then release the keys. Upgrading Software New software versions are released from time to time.

  • Page 61: Appendix, Miscellaneous Drawings

    Chapter: 9. Appendix, Miscellaneous Drawings SKIPPER Electronics AS GDS101 Operation and Installation 9. Appendix, Miscellaneous Drawings For repeater and repeater dimmer, see separate manual: IR301 manual For tank and sea valve, see separate manuals: ETNSLJB-manual. Single bottom sea valve (discontinued from 2007).

  • Page 62: Fig. 9.1 Transducer Selector Connection

    Chapter: 9. Appendix, Miscellaneous Drawings SKIPPER Electronics AS GDS101 Operation and Installation RevNo Revision note Date Signature Checked 200KHZ 200KHZ SCRN 38KHZ 38KHZ SCRN 50KHZ 50KHZ SCRN TEMP S - TEMP S + ANAREF ANA 20MA ANAREF ANA 10V VIDEO C...

  • Page 63: Fig. 9.2 Transducer Selector

    Chapter: 9. Appendix, Miscellaneous Drawings SKIPPER Electronics AS GDS101 Operation and Installation 96 [3,780] Stud M4 x 12 FORE ENS518 46 [1,811] 60,9 [2,398] Turned 180° 60 [2,362] 14 [0,551] 70 [2,756] Grounding Label Fig. 9.2 Transducer Selector Page 63 of 70...

  • Page 64: Fig. 9.3 Cable Gland Connection

    Chapter: 9. Appendix, Miscellaneous Drawings SKIPPER Electronics AS GDS101 Operation and Installation 2. Twisted backward 1. Straight braided screen ..braided screen The assembly of cable gland is quick and easy: 1. Partially expose the braided screen by removing the outer sheath of the cable at a lenght of approx.

  • Page 65: Fig. 9.4 Emc Mounting Kit

    Chapter: 9. Appendix, Miscellaneous Drawings SKIPPER Electronics AS GDS101 Operation and Installation Fig. 9.4 EMC Mounting Kit Page 65 of 70 Edition: 2014.04.01...

  • Page 66: 10. Warranty And Utilization

    10. Warranty and Utilization Warranty: • SKIPPER Electronics AS gives 12 months limited guarantee on all deliveries from SKIPPER Electronics AS, Norway. • Please note that if the equipment is delivered by a third party, the third party’s warranty conditions may apply.

  • Page 67: 11. Notes

    Chapter: 11. Notes SKIPPER Electronics AS GDS101 Operation and Installation 11. Notes ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- --------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------- ----------------------------------------------------------------------------------------------------------------------------------------------...

  • Page 68: Index

    Fig. 1.1 Main Display Unit Panel Layout 7 Alarm relay 45 Fig. 1.2 System Diagram 8 Alarms 9 Fig 1.3 GDS101 Primary Functions 10 Alarm Settings 26 Fig. 2.1 Setting and Parameter Entry Flowchart 11 Analogue interfaces 46 Fig. 2.2. Screen 1, Primary Operation screen. 13 Analogue Output and Log Pulse Input Range Selection 51 Fig.
  • Page 69 Chapter: 12. Index SKIPPER Electronics AS GDS101 Operation and Installation Heading indication from GPS 33 Operator Unit Maintenance 30 HIST. FRMT 19 Options 9, 28, 50, 54 HIST. HOUR 19 Oscilloscope Screen 28 HIST. MIN 19 Output Power 25 HISTORY 19...
  • Page 70 Chapter: 12. Index SKIPPER Electronics AS GDS101 Operation and Installation Speed 53 Speed indication from GPS 33 Standard System Supply 35 Start-up and system Adaption 51 STATUS 20 Status Screen 28 Status screen diagnosis 32 SYSTEM 14 System Adaptation 51...

Table of Contents

Save PDF