Motion Aiming Control - Datalogic PowerScan BT9500 Family Quick Reference Manual

Operating Mode
Operating Mode (continued)
ENTER/EXIT PROGRAMMING MODE
Scan Mode =
Scan Mode = Trigger
Pulse Multiple
Trigger Single
Scan Mode = Scan Mode = Flashing
Trigger Hold Multiple
Scan Mode = Always On Scan Mode = Stand Mode

Motion Aiming Control

This feature configures the ability of the scanner to
Enable/Disable the Aiming system when motion is
detected. Scan the Enter/Exit Programming bar code
above, then either of the barcodes below.
Motion Aiming Control =
Motion Aiming Control =
Enable
Disable
Quick Reference Guide 19