Ptz Control; Network Setup; System Setup - Watchguard DVR4EONPACK Manual

4.8 PTZ control

Click "Setup" →"PTZ " to enter the PTZ Control mode. See Figure 5-6:
See Chapter 3 "Network Setup" in this manual for the setup method.

4.9 Network setup

Click "Setup" →"Network Setup" to enter the Network Setup mode, as shown below:
See Chapter 3 "Network Setup" in this manual for the setup method.

4.10 System setup

Click "Setup" →"Setting" to enter the Setting screen, as shown below:
INTERNET: setting the code stream; the higher the code stream is, the clearer the remote image will be, but the network
bandwidth must be high, otherwise the image may have a delay.
File SAVE PATH: setting the record saving directory during remote recording and remote backup
IE password: setting the IE login password (Note: This password may be cleared in the main menu of the DVR.)
25