Table of Contents
Advertisement
F
MODES OF OPERATION
FOREWORD
1
ASSISTED MODE
2
AUTOMATIC MODE
NOTICE
NOTE
G
PREVENTION MISFILLING (optional)
PREMISE
OPERATION
NOTICE
PART NUMBER
127652
127654
M0302
The main feature of these nozzles is that they are easy to
use.
Two operating modes are available:
Dispense by operating the nozzle lever. To interrupt dis-
pensing manually, release the lever.
Use the opening lever lock device for automatic dispens-
ing.
To continue dispensing after automatic stop, the lever
must be fully released before proceeding to operate it
again.
To interrupt dispensing in manual mode, press the lever
again, thereby releasing the device, and then release.
Do not use the nozzle outside the parameters indi-
cated on the "technical specifications" chart
Dispensing is automatically interrupted
shut-off device, which operates when the level of the
liquid reaches the end of the spout.
Refuelling with the nozzle equipped with "magnet switch"
is only possible in combination with the "magnet adapter"
, so misfuelling into tanks is made impossible
The "magnet switch" is a fixed magnetic field within the
filler necks of the nozzle. This opens the magnet switch in
the spout, so it is only possible to dispense from the tank
where the magnet adaptor is installed.
Nozzles equipped with "magnet switch" work only in
combination with the "magnet adapter". The "mag-
net adapter" is an optional to be bought separately.
DESCRIPTION
Magnet switch misfil spout
Magnet adapter misfil
adapter (installs into DN40
filler necks only
due
to the
PICTURE
EN
7
Advertisement
Table of Contents
