Ford TOURNEO COURIER Owner's Manual page 115

Changing the Cruise Speed
You can change the cruise speed using one
of the following:
1. Adjust your vehicle speed to the
desired cruise speed. Press and release
SET+.
2. Press and hold SET+ or SET- until your
vehicle reaches the desired cruise
speed.
3. Press and release SET+ or SET- to
change the cruise speed in
approximately 2 kph (1 mph)
increments until your vehicle reaches
the desired cruise speed.
Canceling the Cruise Speed
Press and release CAN to place the system
in standby mode.
Note: If you press the brake pedal when
driving under cruise control, you will place
the system in standby mode.
Resuming the Cruise Speed
Press and release RES. Your vehicle speed
will return to the previously set cruise
speed.
Tourneo Courier/Transit Courier (C4A) Vehicles Built From: 19-06-2014, M1 Kombi/M1 Kombi Van/N1 Kombi/N1 Kombi Van/Van, ET7J-19A321-AKB (CG3621en) enGBR, Edition date: 04/2014,
Cruise Control
113