Disassembly Procedures - Epson Stylus CX3700 Service Manual

E P SON Stylu s CX3700/CX3800/CX3805/CX3810/DX3800/DX3850

4.3 Disassembly Procedures

The flowchart below shows step-by-step disassembly procedures. When disassembling each unit, refer to the page number shown in the figure.
START
"4.4.1 Document Cover/Document Cover
Mat/ASF Cover" (p97)
"4.4.5 Panel Unit" (p100)
"4.4.6 Housing, Upper" (p101)
"4.4.8 Printer Mechanism" (p104)
"4.4.11 Main Board Unit" (p111)
"4.4.16 CR Guide Frame" (p118)
"4.4.17 CR Motor" (p119)
"4.4.19 Carriage Unit/CR Encoder Board/PW
Sensor Board/Head FFC" (p121)
"4.4.21 EJ Frame Unit" (p125)
"4.4.23 Paper Guide Front Unit" (p127)
"4.4.24 PF Roller Unit" (p128)
DISASSEMBLY/ASSEMBLY
"4.4.2 Paper Support Assy." (p98)
"4.4.4 Scanner Unit" (p99)
"4.5.1 Scanner Housing, Upper" (p129)
"4.5.2 Scanner Carriage Unit" (p130)
"4.4.7 Printhead" (p102)
"4.4.9 PS Board Unit" (p107)
"4.4.18 PF Motor" (p120)
"4.4.20 Paper Guide Upper Unit" (p124)
To remove the "Ink System Unit", all parts shown in the red boxes need to be removed.
To remove the "Paper Guide Front Unit", all parts shown in the red boxes need to be removed.
Figure 4-1. Disassembling Flowchart
Disassembly Procedures
"4.4.3 Stacker Assy." (p98)
"4.5.3 Scanner Motor Unit/Scanner HP
Sensor/ Driven Pulley" (p132)
"4.4.10 Waste Ink Pads/Stacker Lock/
Rubber Feet" (p108)
Revision A
"4.4.12 ASF Unit" (p113)
"4.4.13 Holder Shaft Unit" (p115)
"4.4.22 Ink System Unit" (p126)
96