Operations - Epson Stylus CX3700 Service Manual

EPSON Stylus CX3700/CX3800/CX3805/CX3810/DX3800/DX3850

1.5.3 Operations

1.5.3.1 Stand-alone Copy
The functions of this unit caused by each button in stand-alone copy mode are described in the following table.
Button
Power Button • Turn on or off this unit.
• Start or advance ink cartridge (I/C) exchanging procedure.
Case
[All inks are enough.]
[Ink low, Ink out, Without I/C error]
Ink Button
[CR is in some color's ink check position.] Move CR to next color's ink check position or I/C exchange position.
[CR is in I/C exchange position.]
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for ink out error, paper out error, index sheet error, PG error.
Ink Button • Start cleaning head procedure.
(Holding over 3
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status except for paper out error, index sheet error, PG error.
sec.)
• Alternate paper size of "Letter (or A4)" and "4"x6" (or 10x15)".
Paper Size Button
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status.
• Alternate "Fit to Page" status and turn on or off the "Fit to Page" LED.
Fit to Page Button
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in error status.
• Start monochrome copy.
B&W Start Button
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in ink out error.
• Load paper in paper out error or double feed error and eject paper in paper jam error.
• Start color copy.
Color Start Button
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in ink out error.
• Load paper in paper out error or double feed error and eject paper in paper jam error.
• Stop job of copying or printing and reset the number of copies to the beginning.
• Eject paper when paper exists or may exist in the paper path.
Stop Button
• Invalid while PC scanning, cleaning head and exchanging I/C.
• Clear some of error status.
B&W Start Button • Start draft monochrome copy when "Plain Paper" and "Letter (or A4)" are selected.
+ Stop Button
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in ink out error, or without "Letter" or "A4" is selected.
Color Start Button • Start draft color copy when "Plain Paper" and "Letter (or A4)" are selected.
+ Stop Button
• Invalid while printing, scanning, cleaning head, stopping printing or copying, exchanging I/C, or in ink out error, or without "Letter" or "A4" is selected.
PRODUCT DESCRIPTION
Table 1-35. Operations
Function
Stand-alone Copy
Move carriage (CR) to I/C exchange position.
Move CR to each color's ink check position if that color's I/C is ink low or ink out or without I/C. CR moves in the order of Cyan,
Magenta, Yellow, Black.
Move CR to standby position.
Control Panel
Revision A
29