Memory Module - NEC Versa Sxi Series Service And Reference Manual

Memory Module

Follow these steps to remove a memory module.
Locate the memory module bay.
1.
Remove the screw and bay cover.
2.
Remove the memory module as follows:
3.
Press the locking tabs away from the sides of the SO-DIMM and hold while gently
!
lifting on the edge of the SO-DIMM.
When the edge of the SO-DIMM pops up and is at approximately a 60 degree angle,
!
pull the SO-DIMM from the socket.
3-6 Disassembly and Reassembly
Removing an installed SO-DIMM