Keyboard - NEC Versa Sxi Series Service And Reference Manual

In Windows NT, press the Power button for less than 4 seconds to put your system into
!
Suspend mode. The BIOS parameter "System Switch" must be set to "Sleep."
Use the Power button in the following ways:
!
— Press the Power button to power on.
— Press the Power button to resume from Standby (Windows 98/2000) or Suspend
(Windows NT) mode and proceed with normal operation.
— Hold the Power button in place for 4 or more seconds to initiate power override
(powers off the system). Only use this option if you cannot power off your system
using Start, Shutdown.

Keyboard

The NEC Versa keyboard offers the following features, which are described after the figure.
A – Function Keys
B – Numeric Keys
C – Cursor Control Keys
Function keys — Twelve function keys,
!
keyboard. These keys work together with the
keys are preprogrammed with dual functions, some of which are printed in blue on the key.
Function keys are application-driven. See the specific application's user guide for
information about how each function key works within the application you are using.
The following function key combinations are preprogrammed for the NEC Versa SXi
computer.
— Toggles between three video modes; LCD, CRT, or both (LCD and CRT).
Fn-F3
— Sets Standby power management mode on, in Windows NT.
Fn-F4
— In Windows NT, press any key to resume from Standby mode.
— No function when Windows 98/2000 configured for Advanced Configuration and
Power Interface (ACPI). In Windows 98/2000, Standby is equivalent to Windows 95
Suspend mode. To resume from Windows 98/2000 Standby mode, press the Power
button.
— toggles the system beep on and off.
Fn-F6
1-6 System Overview
Keyboard
D – Control Keys
E – Windows Keys
F – Typewriter Keys
through , are available on the NEC Versa
F1 F12
key to activate special functions. Several
Fn