Assembly and disassembly should be done after the plug is pull out
of the socket
It should be down as instructed in the Explosive Review.
Disassemble the Compartment grill: With the crossed
screwdriver to turn the screw in a anticlockwise manner, it could be
④Disassemble the compressor cover: With the crossed
screwdriver to turn the screw in an anticlockwise manner, and take
it out from the lower left to the upper right.
⑤Disassemble the control panel: stretch your arm into the
compartment, push the connector inside, when the clip falls off the
cabinet, take off the control panel and the connective wire cord with
an acutilingual plier.