Removing The Power Unit - Yamaha Z300A Supplementary Service Manual

POWR

Removing the power unit

NOTE:
It is recommended to loosen the flywheel
magnet nut before removing the power unit to
improve working efficiency.
1. Disconnect the battery leads 1.
2. Disconnect the shift cable 2 and the
throttle cable 3.
3. Disconnect the fuel hose 4 and the oil
hose 5.
4. Remove the flywheel magnet cover.
5. Remove the junction box cover, and then
disconnect the cooling water hose 6 and
the PTT motor leads 7.
37
Power unit
6. Remove the bracket 8 and disconnect
the trim sensor coupler (or connector) 9.
8
7. Disconnect the PTT switch coupler and
the shift lever 0.
8. Disconnect the cooling water hose A.
A
9
S6D05020
S6D05040
6D03F1X