Yamaha Z300A Supplementary Service Manual page 49

11. Connect the shift cable F and throttle
cable G, and then adjust their lengths.
12. Install the Woodruff key and flywheel
magnet.
13. Tighten the flywheel magnet nut to the
specified torque.
CAUTION:
Apply force in the direction of the arrows
shown to prevent the flywheel holder from
slipping off easily.
NOTE:
Apply engine oil to the flywheel magnet nut
before installation.
Flywheel holder: 90890-06522
Flywheel magnet nut:
190 N·m (19.0 kgf·m, 140 ft·lb)
14. Install the pointer H.
6D03F1X
NOTE:
Align the marks a on the pointer H, which
you made during disassembly.
15. Install all removed parts.
Crankcase
42