Network Hosts - Encore EN-4000 Configuring General Settings

Configuring General Settings for the EN-4000
Then select the tab for Advanced Settings.
7
❖ The DHCP and DNS Advanced Settings Screen is displayed
for configuration.
Figure 4-25. DHCP and DNS Advanced Settings Screen
When you have finished configuring the fields on this screen, do one of the
8
following:
a If you wish to save the configuration and use it immediately, select Save and
Apply.
b If you wish to save the configuration, but not to use it until the EN-4000 is
restarted, select Save.
c If you wish to discard the configuration, select Reset.

4.4.2 Network Hosts

To configure names for host devices (in the private network and in the public
1
network), select Network, Hostnames.
❖ The Network Host Names Screen is displayed
(Figure
(Figure 4-26).
Go to Table
Page 4-19 of Contents
4-25)