Station Connection - Encore ENH924-AUT User Manual

3. Station Connection

Connect each station to the switch by twisted-pair cable. Plug one RJ-45
connector into a RJ-45 port of the switch, and plug the other RJ-45 connector
into the station's network adapter. Power on the switch and then system is
ready.
For cable selection, refer to the following table.
Station Connection
4.
In making a switch interconnection, you could use any port to connect another
switch with straight or crossover cable. As all the ports support auto MDI / MDI-X
function, using a straight cable to make a switch-to-switch connection is allowed.
For cable selection, refer to the following table：
Network Speed
10Mbps
100Mbps
Rack-Mount
The switch may standalone, or may be mounted in a standard 19-inch
equipment rack. Rack mounting produces an orderly installation when you have
a number of related network devices.
The switch is supplied with two optional rack mounting brackets and screws.
These are used for rack mounting the unit.
Network Application
5.
Cable Type
Cat. 3, 4, 5 UTP/STP
Cat. 5 UTP/STP
4
Max. Length
100 meters
100 meters