Attach Drawer Back Panel To Drawer Assembly; Slide The Drawer Into The Crib; Sample Label - MDB Family 5971 Crib Assembly And Operation Manual

Attach drawer back panel to drawer assembly.

STEP 9.
L-6

Slide the drawer into the crib.

STEP 10.
KEEP THIS MANUAL IN A
SAFE PLACE FOR
FUTURE REFERENCE.
Before placing your mattress in the crib, you can
make your own mattress protector by cutting the
cardboard packing insert to 27" x 51". Place it on
the spring frame under the mattress to extend the
life of the mattress.
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27 1/4 INCHES (69CM)
BY 51 5/8 INCHES (131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).
Please refer to the label (sample below) on the inside face
of the headboard. Record the model/ item number and serial
number of your crib, the name of the store where you made
the purchase, the date of purchase and the wood finish in
the box to the lower right.
CAUTION: ANY MATTRESS USED IN THIS CRIB
MUST BE AT LEAST 27 1/4 INCHES (69CM) BY
51 5/8 INCHES (131CM) WITH A THICKNESS
NOT EXCEEDING 6 INCHES (15CM).

SAMPLE LABEL

Please read the Caution and Warning
Statements insert before using your crib.
WE WILL ASK YOU FOR YOUR SERIAL NUMBER FOR ALL
WARRANTY AND REPLACEMENT PART REQUESTS. PLEASE
REFER TO THE LAST PAGE OF THIS INSTRUCTION SHEET FOR
WARRANTY INFORMATION. KEEP THIS MANUAL FOR FUTURE
REFERENCE.
THIS PRODUCT CONFORMS TO THE
APPLICABLE REGULATIONS OF THE
CONSUMER PRODUCTS SAFETY COMMISSION.
www.themdbfamily.com
U
U
U
Page 6