iStorage datashur personal User Manual page 7

personal
5. How to create a new User PIN - continued
PIN requirements:
• Must be between 7-15 digits in length
• Must not contain only repetitive numbers e.g. 3-3-3-3-3-3-3
• Must not contain only consecutive numbers e.g. (1-2-3-4-5-6-7),(7-8-9-0-1-2-3-4),(7-6-5-4-3-2-1)
Drive must NOT be connected to a host
•
INSTRUCTIONS
Press and hold KEY Button
While are illuminated enter a
New User PIN and press KEY Button
Re-enter New User PIN
and press KEY Button
Insert datAshur Personal into USB port
Note:
It becomes necessary to format
the drive at this point as all
previous data is obscured with the
previous encryption key (including
the file allocation table).
A User PIN can only be created when the
RED LED is lit in a constant state
Personal reset) or changed when the
®
GREEN LED is blinking
unlocked).
Neither User nor Admin PIN can be created
while the drive is connected to a host com-
puter.
for 3 seconds
(datAshur
(datAshur Personal
®
www.istorage-uk.com
LED ACTIVITY
will illuminate together
will blink in unison
will illuminate together for approximately
4 seconds and then:
will blink indicating correct PIN entry
will illuminate in a constant state
blink alternately if PIN entry incorrect
#7