Setting The Water Hardness - WMF 10 User Manual

Caring for the coffee pad machine.
>
If necessary, inquire about the water hardness of your tap water from the responsible water utility or
local authority.
>
Change the setting if the water hardness is less than 21°dH.
You will then not be prompted to descale so often.
5.5.2

Setting the water hardness

For setting the water hardness, the appliance has to be in the Off state.
>
Keep the descaling button pressed down (for 3 to 4 seconds) until the illuminated cross fl ashes white.
The number of pulses indicates the current setting.
>
Repeatedly press the descaling button.
Every time you press it, the setting changes.
Flash signal Hardness
• • • 0 - 7° dH
•• •• •• >7 - 14° dH
••• ••• ••• >14 - 21° dH
•••• •••• •••• >21° dH
>
Press the On/Off/C-button to save the correct water hardness.
>
The illuminated cross briefl y fl ashes white 3 times to confi rm the successful programming.
>
Do not stop for more than 10 seconds when setting the water hardness.
Otherwise, the appliance automatically switches into the Off state and retains the originally set value.
Ca and Mg ions
<1.3 mmol/
>1.3...2.5 mmol/l
>2.6...3.8 mmol/l
>3.8 mmol/l.
GB
34